Electric mould cartridge heaters had been finished and ready for delivery today.

Specifciation: diameter 10mm , length 177.8mm voltage 220V 650W , with high temperature fiberglass wire 300mm length

Electric Single heating elements, we also call it cartridge heater rod its structure is generally composed of the following parts: insulator, sealing material, MGO rod, filler, electric resistance heating wire, metal protective sheath and terminal.

The spiral resistance heating wire and mgo rod are located in the center of the metal protective sheath. Its manufacturing process is to thread the spiral resistance heating wire(NiCr wire or FeCrAl wire) into the seamless steel tube, stainless steel tube ,copper tube or aluminum pipe. The gap is evenly filled with mgo powder, such as crystalline magnesium oxide, through a multi pipe filling machine, and then the cartridge heater’s metal tube is reduced by a tube shrinking machine to make the oxide medium dense (the density reaches 3.3g/cm) ³ Above), ensure that the heating resistance wire is isolated from the air, and the center position does not deviate and touch the metal sheath. In this way, the calorific value per unit area can be increased by more than ten times.

Sinton Electric Cartridge heater’s application:

small volume and high power. It is especially suitable for the heating of metal molds. It is usually used with thermocouples to achieve good heating and temperature control effect.

Main application fields of sinton electric cartridge heater: stamping die, hot knife, packaging machinery, injection mold, extrusion mold, rubber molding mold, melt blown mold, hot pressing molding machinery, semiconductor processing, pharmaceutical machinery, uniform heating platform, liquid heating, etc.