The far-infrared radiation heating device uses the embedded far-infrared ceramic tile as the heating source, which is installed in a plate frame made of stainless steel and evenly distributed, and its temperature measuring probe is also bonded in the far-infrared ceramic heating plate, so as to measure the accurate surface temperature of the heater during heating.
When the far infrared heater is powered on, it will quickly rise to the set temperature in a short time. At the same time, a layer of zirconia coating sintered on the surface of the ceramic heating tile will generate molecular vibration under the action of temperature after being heated, resulting in far infrared waves.
The wavelength of this heater can accelerate the movement of volatile substances and water molecules on the surfaces of various substances, and achieve rapid decomposition, which can make the surface of the baked goods achieve the effect of curing and drying in a short time. It is used in various industries such as paint drying, food drying, medicine drying, gel coating drying and curing, drying and shaping in vacuum blister cars, etc., and has ideal effects and uses.
Sinton ceramic emitter are widely used in pre-heating of plastic sheets for vacuum forming & thermoforming, drying paints, lacquer & varnish curing, drying printing inks, drying textiles, activating adhesives, removing surface water from objects or moisture removal from fabric and paper, animal husbandry and rearing.
Power and voltage：380V 500W, also can be made according to your design.
Working Temperature Range:1 - 750 ℃
FFE Full Flat Element
Mean surface temperature
Max permissible operating temperature
Max power density W/cm²（W/inch²）
Radiant Watt Density at 100mm(W/cm²)
Useful wavelength range
2 to 10um
The ceramic IR heaters are highly efficient.
Ceramic infrared heater offers precise targeting and control with minimal peripheral heat.
It is possible to apply heat only where and when it is required.
The energy in an infrared heater is transmitted at the speed of light from the element to the product.
A constant rate of heating is obtained because the source temperature is normally much higher than that of the product even at the end of the heating cycle.
If there's any ceramic flat heating element inquiry, welcome contact with us and we are professional with better services and high quality ceramic flat heating element.
Sinton Group mainly make kinds of electric heating elements and temperature sensor: For example , cartridge heater,hot runner coil heating element, tubular heater element, ceramic emitter, ceramic plate heating element, aluminium casting heater, mica band heater, ceramic band heating elements, Flexible ceramic heating pad, kapton heater, PI film heating elements, resistance wire, thermocouple, Pt100 etc. Also we make industrial heaters for example air duct heater, pipeline heater, oil circulation heater, drying oven etc. All of our heaters and temperature sensor can be OEM and now we have acquired CE certificate for our heating elements.